-
1、[单选题]Always ensure that the turning gear is____, even at the quay, the wake from other ships may turn the propeller and thus the engine.
-
A.disengaged
-
B. engaged
-
C. assembled
-
D. disassembled
查看答案
开始考试
-
2、[单选题]The scavenge port inspection should be carried out_____, to obtain the most reliable result with regard to the effectiveness and sufficiency of the cylinder lubrication and the combustion cycle (complete or incomplete) .
-
A.at the first stop after a long voyage e. gby anchoring if possible
-
B. at the first stop after arrival at harbor
-
C. at the first stop after low load running
-
D. at the first stop after passing river or canal passage
查看答案
开始考试
-
3、[单选题]The sealing function of the piston ring is brought about by the gas pressure above and behind the piston ring, which forces it ____ against the bottom of the ring groove, and ___ against the cylinder wall.
-
A.upwards / inwards
-
B. upwards / outwards
-
C. downwards / inwards
-
D. downwards / outwards
查看答案
开始考试
-
4、[单选题]When good and steady service conditions have been achieved, the running surfaces of the piston rings and cylinder liner will be_____In addition, the rings will move freely in the grooves and also be well oiled intact, and not unduly worn.
-
A.hazy light
-
B. hazy light brown
-
C. hazy light blue
-
D. hazy light grey
查看答案
开始考试
-
5、[单选题]If over a period of time, the oi1 film partially disappears, so that dry areas are formed on the cylinder wall, these areas and the piston surfaces will by frictional interaction, become finely scuffed and hardened, i. egood mirror surface" will have deterioratedWhat condition of the piston rings can result in this phenomenon?
-
A.micro-seizure
-
B. sticking
-
C. scratched
-
D. breakage/collapse
查看答案
开始考试
-
6、[单选题]If due to thick and hard deposits of carbon, the piston rings cannot move freely in their grooves, dark areas will often appear on the upper part of the cylinder wall (may not be the risible at port inspection) What condition of the piston rings can result in this phenomenon?
-
A.micro-seizure
-
B. sticking
-
C. scratched
-
D. breakage / collapse
查看答案
开始考试
-
7、[单选题]Broken piston rings manifest themselves during the scavenge port inspection by_____.
-
A.Lack of elastic tension", when the rings are pressed into the groove by means of a stick:
-
B. Blackish appearance
-
C. Fractured rings and missing rings
-
D. all off the above
查看答案
开始考试
-
8、[单选题]If the gas pressure behind the ring is built up too slowly, and thereby exerts an inadequate outward pressureIn such a case, the combustion gas can penetrate between the liner and ring, and violently force the ring inwards, in the grooveWhat result will this type of sudden "shock" loading eventually lead to?
-
A.micro-seizure
-
B. scratch
-
C. break
-
D. stick
查看答案
开始考试
-
9、[单选题]” Clover-leafing” is a term used to describe corrosive wear at several separate points around liner circumference- i. ein some cases the liner bore may assume a “clover-leaf” shape.
-
A.transverse
-
B. longitudinal
-
C. circumferential
-
D. radial
查看答案
开始考试
-
10、[单选题]If there are micro-seized areas on the liner or skirt scratch-over manually with a coarse carbo-rundum stone (grindstone) , moving the grindstone ____ at an angle of 20 to 30 degrees to horizontal.
-
A.clockwise
-
B. anticlockwise
-
C. crosswise
-
D. vertically
查看答案
开始考试
-
11、[单选题]The cylinder oil is pumped into the cylinder (via non-return valves) when the piston rings pass the lubricating orifices during ____.
-
A.the upward stroke
-
B. the downward stroke
-
C. the power stroke
-
D. the suction stroke
查看答案
开始考试
-
12、[单选题]Just after stopping the engine while the oil is still circulatingCheck that uniform oil jets appear from all the oil outlet grooves in the crosshead bearing lower shell and the guide shoesThe oil flow from ____ must be compared from unit; there should be a similarity in the flow patterns.
-
A.the piston cooling oil return pipes
-
B. the main and crankpin bearings
-
C. thrust and intermediate bearings
-
D. stern tube and thrust bearings
查看答案
开始考试
-
13、[单选题]During check on top clearance in main bearings, turn the crankthrow for the relevant cylinder unit to ____ and stop the lube oil circulating pump.
-
A.port side
-
B. starboard side
-
C. BDC position
-
D. TDC position
查看答案
开始考试